Canoga Perkins Fiber Optic Broadband Access Systems Solutions
Canoga Perkins
Canoga
Perkins offers a full range of fiber optic
solutions for data communications requirements. Product lines
include fiber optic modems for a variety of interfaces and data
rates, multiplexers serving a wide range of speeds, capacities and
interfaces and LAN products that provide long distance LAN extension
up to 100km. Our video conferencing products offer video extensions
to meet requirements in a variety of environments. Canoga Perkins
specializes in fiber optic communications. The
Company designs, manufactures and sells
LAN/WAN
Internetworking,
fiber optic modems
and multiplexers
(CWDM, WDM and TDM),
Videoconferencing products and Outside Plant Test equipment. Canoga
Perkins seeks to offer
clients the most technologically and functionally advanced
transparent optical network systems available for long distance
fiber optic extension and low cost CWDM systems. Using these
systems, customers can increase their reliability, efficiency and
new application development.
|
|
FIBER MODEM PRODUCTS
2240 Universal Modem
For Sync, Async, G.703
compatible T1, E1 applications (up to 2.048Mbps), the 2240
offers over 15 interfaces, selectable clock rates and
pass-through controls.
2245 DS3 Modem
The Model 2245 is a multi-featured DS3 fiber optic
modem that transmits standard DSX-3 (44.736 Mbps) signals
over single mode or multimode fiber optic cable. The 2245
DS3 fiber optic modem transports any B3ZS coded data stream
with either framed or unframed formats. It provides complete
diagnostic and fault isolation features when transporting
M13 or C-bit parity framed DSX-3 signals.
2262 T1/E1 Modem
Provides a transparent fiber optic link extension for
E1 or T1 signals, supporting AMI, B8ZS and HDB3. Offers
alarm and remote loopback indicators.
2270 High Speed Modem
Featuring data through-put speeds up to 20
Mbps with selected interfaces, the Model 2270 is ideal for
modern cryptographic environments and other applications
requiring extremely high speeds.
2290 Multi-Featured Modem
Suitable for most general purpose high-speed
sync and async applications. Typical applications include
satellite downlinks, microwave link extension and linking of
high speed graphics devices.
2300 Series Universal Fiber Optic
Modems For all
branches of the Military, Government agencies, commercial
and government system integrators, public and private
network administrators who need to extend standards based
serial data over fiber optic cable, Canoga Perkins 2300
Series Fiber Optic Modems combine SNMP management with
versatile and cost effective solutions for all your
commercial and C4I asset applications
2345 Fiber Optic modem for
T3 and DS3 extensions Suitable for most general purpose high-speed sync and async
applications. Typical applications include satellite
downlinks, microwave link extension and linking of high
speed graphics devices.
2346 DS3 Modem This product is the solution that problem of the
Telco Demark in the wrong place or even the wrong building.
When you need to tie building communications together at the
T3 - DS3 level the 2346 DS3 Fiber Optic modems will let you
extend out to 100KM.
2361 EdgeAccess T1 Fiber Optic Modem
(Managed) The Model 2361 is a G.703
compliant EdgeAccess T1 fiber optic modem. It is a
microprocessor-based modem and supports the standard speed
of 1.544Mbps. It provides a transparent fiber optic link
extension for AMI and B8ZS bipolar line codes.
2461 EdgeAccess E1 Fiber Optic Modem
(Managed) The Model 2461 is a G.703
compliant EdgeAccess E1 fiber optic modem. It is a
microprocessor-based modem and supports the standard speed
of 2.048Mbps. It provides a transparent fiber optic link
extension for AMI and HDB3 bipolar line codes.
Model 2201 Model 2200R Model 2202 Fiber Optic Modem Chassis / Shelf / Rack
|
|
HARDENED
MEDIA CONVERTERS AND SWITCH |
| |
Canoga Perkins H101
Hardened 10 Mbps Ethernet
Media Converter The model H101 Hardened 10 Mbps Ethernet BNC
to Copper Media Converter is industrial strength all the
way.
|
| |
Canoga Perkins HF101
Hardened 10 Mbps Ethernet Copper to Fiber Media Converter
The model HF101 Hardened 10 Mbps Ethernet Copper Media
Converter is designed to provide reliable, trouble free
operation in harsh industrial and outdoor applications
environments.
|
| |
Canoga Perkins HF1001
Hardened 100 Mbps Ethernet Copper to Fiber Media Converter
Convert and transmit data between 100BaseTX shielded twisted
pair (STP) and 100BaseFX fiber optic cables for media
flexibility in new or expanding 100 Mbps Ethernet networks
|
| |
Canoga Perkins HS8000
Hardened
10/100 Mbps Eight Port Ethernet Switch Hardened SNMP
Managed Eight Port 10/100 Mbps Ethernet Switch with six
10/100 Mbps Switched Copper Ports and Two 100 Mbps Fiber
Uplinks
|
| |
|
FIBER OPTIC
LAN / SAN
EXTENDERS |
|
|
Canoga Perkins L311
The Model L311 is a
managed UTP-to-Fiber Media Converter that extends 10BASE-T
UTP segments with fiber optic cable. The L311 extends the
interconnection between switches or stations up to 100km.
|
|
Canoga Perkins L312
The L312 is a
managed UTP to Fiber Ethernet Media Converter. It
extends 10BASE-T UTP segments up to 120km over Single Mode
fiber. It is designed for installation into Canoga Perkins
carrier class UCS platform, and is also available as a
standalone for desktop or wall mount installations.
|
|
|
Canoga Perkins L321
The L321 is a managed
UTP-to-Fiber Media Converter that extends 100BASE-T UTP
segments with fiber optic cable. The L321 extends the
interconnection between switches or stations up to 120km.
|
|
Canoga Perkins L322 The L322 is a managed UTP to Fiber Fast Ethernet
Media Converter. It extends 100BASE-T UTP segments up to
120km over Single Mode fiber. It is designed for
installation into Canoga Perkins Carrier Class UCS chassis,
and is also available as a standalone for desktop or wall
mount installations.
|
Canoga Perkins L351
The L351 10/100BaseT Ethernet Service Unit (ESU)
provides an ideal choice for Service Providers delivering
Ethernet Transparent LAN Service (TLS) LAN extension
services and helps support QoS implementations. The L351
provides the longest distance extension of any product in
its class at 120 km and is NEBS Level 3 Tested and Certified
|
|
|
Canoga Perkins 8829
The 8829 FDX 10BASE-T UTP
to Fiber Media Converter - Provides UTP to fiber optic media
conversion enabling interconnection of switches or stations
over 100 km apart in FDX mode, or 3 km in HDX mode.
|
|
Canoga Perkins 8835
The
8835 Fiber Optic Repeater - Provides cost effective 3 port
Ethernet LAN Repeater that is used to terminate fiber optic
LANs from a remote Network Node while providing the
appropriate media interface to the customer equipment.
|
|
Canoga Perkins 9101
19"
Rack Mount Chassis - Designed to house a mix of up to twelve
10Mbps or 100Mbps transceivers, media converters, or passive
WDM modules. 110VAC or -48v power supplies with optional
redundancy.
|
|
Canoga Perkins 9103
The 9103 is a cost-effective, compact, -48VDC rack mountable
solution that converts signals from 100BASETX to 100BASE-FX
and is transparent to half and full duplex operation. The
9103 single or dual Media Converter also supports
connectivity of up to 120km over single mode fiber optic
cable in full duplex mode.
|
|
Canoga Perkins 9119
Fast Ethernet 100BASE-TX to 100BASE-FX Fiber Media
Converter - It provides transparent 100Mbps Full Duplex
operation, and supports connectivity of up to 3 km over
multimode fiber, and over 100km on single mode fiber optic
cable. The 9119 will also transparently pass IEEE 802.1q
(1522byte) & Cisco™ ISL (1548byte) packets.
|
|
Canoga Perkins 9120
The 9120 is a Gigabit Ethernet Media Converter.
It extends multimode Gigabit segments up to 90km over single
mode fiber. It is designed for installation into the Canoga
Perkins 9101 LAN Chassis and is also available as a
standalone for desktop or wall mount installation.
|
|
Canoga Perkins 9125
The Model 9125 is a Fibre
Channel Extender. It extends multimode segments up to 90km
over single mode fiber. It is designed for installation into
the Canoga Perkins Model 9101 LAN Chassis, and is available
as a standalone for desktop or wall mount installation.
|
| |
Canoga Perkins 9135 Two
Port EdgeAccess™ Switch - 100BASE-TX/FX Compliant Fast
Ethernet device that supports native 10Mbps, 100Mbps or
10/100Mbps Ethernet LAN Extension Circuits to over 100km.
The 9135 provides speed (10Mbps/100Mbps), mode (HDX to FDX),
optical (MM to SM), and wavelength (1310nm to 1550nm)
conversions, with or without SNMP management. The 9135 will
also transparently pass IEEE 802.1q (1522byte) packets with
the optional SNMP Management Module.
|
|
Canoga Perkins 9135G
The
9135G Gigabit Two-port EdgeAccess™ Switch is a 1000BASE-LX
compliant Ethernet device that supports native Ethernet LAN
Extension circuits. It is designed to provide a smooth
transition through its hot-swappable fiber optic interfaces.
The primary application of the 9135G two-port Gigabit Switch
is as a demarcation device, terminating one-Gigabit fiber
optic LAN Extension circuits at the customer premises with
SNMP management and a choice of customer interfaces.
|
Canoga Perkins 9135E
The 9135E Two-port EdgeAccess® Switch is
an IEEE compliant Ethernet termination device ideal for
terminating 10M, 100M, and Gigabit Ethernet LAN Extension
circuits. It is designed to provide a smooth transition from
10Mbps to 100Mbps or 1000Mbps through hot swappable
interfaces. The primary application of the 9135E is to
terminate 10Mbps, 100Mbps or 1000Mbps LAN Extension services
at the customer premises with SNMP management and a choice
of customer interfaces.
|
| |
|
FIBER OPTIC
MULTIPLEXERS |
| |
Canoga Perkins 3240M
The 3240M Fiber Optic Multiplexer is the most
versatile and dependable multiplexer on the market today. No
other product of its kind can compare with the 3240M for
fault tolerance and reliability. SNMP management allows the
3240M to maximize network uptime and control.
|
|
Canoga Perkins 3240S
The 3240S extends G.703
compliant E1 and T1 circuits over fiber in point-to-point
configurations. Distances up to 90km can be achieved
utilizing extended distance optics, or the economical
multimode LED optics may be sufficient for shorter distance
requirements.
|
|
Canoga Perkins CMX-808 Model CMX-808 is
designed for EIA-232 asynchronous applications, it is an
extremely cost-effective fiber optic multiplexer. It
provides for eight channels of operation. These channel
capacities can also be doubled when used without control
leads and with "Y" cables. Supported asynchronous speeds are
up to 19.2kbpsThe Model 3240S is a managed E1/T1
Fiber Optic Multiplexer designed for maximum network uptime
and control.
|
|
Canoga Perkins CMX-320 Model CMX-320 is designed for
EIA-232 asynchronous applications and is extremely
cost-effective fiber optic multiplexer. It can be configured
for 16 or 32 channels. These channel capacities can also be
doubled when used without control leads and with "Y" cables.
Supports asynchronous speeds of up to 19.2kbps
|
| |
|
FIBER OPTIC
MEDIA CONVERTERS |
|
|
Canoga Perkins
L332 The L332 is
a managed Gigabit Ethernet Media Converter. It extends
Multimode Gigabit segments up to 110km over single mode
fiber. It is designed for installation into the Canoga
Perkins carrier class UCS platform, and is also available as
standalone for desktop or wall-mount installations.
Canoga Perkins L342
The L342 is a managed Gigabit Fiber Channel Extender.
It extends Multimode Fiber Channel up to 110km over single
mode fiber. It is designed for installation into the Canoga
Perkins carrier class UCS platform, and is also available as
standalone for desktop or wall-mount installations.
|
|
| |
Canoga Perkins HF1001 The model HF1001 Hardened 100 Mbps Ethernet Copper to Fiber Media
Converter is designed to provide reliable, trouble free operation in
harsh industrial and outdoor applications environments.
|
| |
|
CWDM / WDM |
| |
Canoga Perkins 6000 Series
2, 3 and 4 Channel CWDM
To maximize the existing fiber plant, Canoga Perkins
offers Coarse Wavelength Division Multiplexer (CWDM) products
designed to cost-effectively increase channel counts from two to
four using the same fiber composite. Models 6002/3/4 are
widely-spaced WDM modules for two to four channels, respectively.
|
| |
Canoga Perkins 6000 Series
4
and 8 Channel CWDM's. Model 6004 and 6008 Passive CWDM modules work
in conjunction with Canoga Perkins’ CWDM transponder line to deliver
carrier class performance at a fraction of the cost of expensive
DWDM systems. Each port is capable of receiving discrete CWDM
wavelengths from 1470nm to 1610nm, with optional 1310nm pass through
channel, and optically multiplexing the wavelengths into one
composite.
|
| |
Canoga Perkins 6100
Access Module
The 6100 is a host module, which
can accommodate one or two converter / transponder modules.
Available as a standalone enclosure or as a module in the UCS. This
card provides the power, management, and alarming for the individual
converter modules that are installed within.
|
| |
Canoga Perkins 6150 FibreXpander
4-Channel CWDM System Expand the capacity of your
existing fiber by installing Canoga Perkins’ innovative FibreXpander
instead of laying more fiber. The FibreXpander allows the user to
extend up to four applications over one pair of single mode fiber,
quadrupling your capacity instantly.
|
| |
Canoga Perkins 6600 Fiber Savers
Fiber Singlers offer a cost-effective solution for connecting two
1310nm devices over an individual single mode fiber. This doubles
the available fiber currently in place or fiber planned for future
expansion. The 6600 Series Fiber Saver is specifically designed for
Enterprise environments with Star Configurations requiring
point-to-point single fiber transmission. The Fiber Saver is
available in 8 or 16 single fiber interfaces in rackmount
configuration.
|
| |
Canoga Perkins 6702 CWDM Transponder
Expand
the capacity of your existing fiber by installing Canoga Perkins’
innovative 6702 Series CWDM Transponder instead of laying more
fiber. The 6702 Series CWDM Transponder allows the user to extend up
to nine applications over one pair of single mode fiber using WDM
technology.
|
| |
Canoga Perkins 6703 CWDM Transponder
Expand
the capacity of your existing fiber by installing Canoga Perkins’
innovative 6703 Series CWDM Transponder instead of laying more
fiber. The 6703 Series CWDM Transponder allows the user to extend up
to nine applications over one pair of single mode fiber using WDM
technology.
|
| |
Canoga Perkins L600 Series Fiber Optic
Transponder
Optical
converter/transponder line interface module (TLIM) for use in a 6100
host module. The L60x TLIM is an unidirectional converter of
multimode to single mode, short reach to long reach optics, and/or
one wavelength to another. A standard converter may take a 1310nm
multimode input and convert it to a 1550nm single mode signal for
transmission over 100km. Wavelengths can be ordered to match those
required for the 6002/3/4 passive WDM modules. Speeds from 8Mbps to
1.25Gbps are accommodated. Clock recovery or bandwidth monitoring
options are available.
|
| |
Canoga Perkins L650 Series / 6001 Fiber
Singlers
Fiber Singlers offer a cost-effective solution for
connecting two 1310nm devices over an individual single mode fiber.
This, in effect, doubles the available fiber currently in place or
fiber planned for future expansion. The L650 Series is an 8Mbps to
1.25Gbps protocol transparent transponder with an integral WDM
element, which combines the transmit and receive optical paths onto
a single fiber. A passive Fiber Singler 6001 can be used at the
remote end when the end equipment supports a loss budget adequate
for the attenuation link. Single and dual stage versions of the 6001
are available that provide cross-talk isolation values greater than
30dB.
|
| |
Canoga Perkins OADM Drop and Continue or Drop
and Insert Multiplexer To maximize fiber
efficiency, Canoga Perkins introduces the passive OADM, Optical
Add/Drop Multiplexer, product line. Canoga Perkins offers two types
of OADMs: Drop and Continue or Drop and Insert. The passive OADM
module allows users to drop a specific optical wavelength at any
point in the application or insert another wavelength to the link.
This can be done on one pair of singlemode fiber instead of multiple
pairs.
|
| |
Canoga Perkins WA-2
Model WA-2 is a
bi-directional two channel WDM. This passive device effectively
combines 1310nm and 1550nm (SMF only) or 850nm and 1310nm (MMF only)
wavelength data signals together over a composite fiber pair. It is
totally speed, protocol, and line code independent; even analog and
digital signals can transverse in parallel.
|
| |
|
UNIVERSAL CHASSIS SYSTEM |
| |
Canoga Perkins UCS 1000 The
5U UCS 1000 offers multiple fiber optic based services up to
Gigabit speeds. The UCS 1000 provides a NEBS Level 3 tested and
certified, cost effective managed platform. Different technologies
can be mixed to form any type of network that you require. A variety
of technology modules with various interface options provide
complete flexibility. Everything is hot swappable and redundancy is
offered to provide a trouble-free, rock solid product you can count
on. Up to 15 technology modules can be housed in one UCS 1000. A 19"
or 23" rackmount can be used with front mount, mid mount, rear mount
or recessed mount. Advanced monitoring, management, trouble shooting
and configuration features of all the UCS 1000 products provide you
full access to the system locally and remotely.
|
| |
Canoga Perkins UCS 1001
The UCS 1001 is a general-purpose 1U, two slot chassis.
Technology modules that are used in the UCS 1000 fit in the UCS
1001. Flexible and scalable, the UCS 1001 accommodates the entire
Canoga Perkins’ Universal Chassis System product line. It is ideal
for customer premises installation, enterprise networks and military
installations. A 19" or 23" rackmount can be used with front mount,
mid mount, rear mount or recessed mount.
|
| |
Canoga Perkins UCS 1002
The EdgeAccess Universal Chassis
System (UCS) Model 1002 is a managed 2U carrier-class
multi-technology platform designed to accommodate the Canoga Perkins
new generation of LAN Extension products with other technology
modules planned. The UCS 1002 is NEBS Level 3 tested and certified,
ensuring a robust and fault-tolerant platform. Up to 14 technology
modules can be housed in one UCS 1002. Up to eight UCS 1002’s can be
controlled by a single IP address.
|
| |
Canoga Perkins UCS 1020 The EdgeAccess 1020 is a one-slot enclosure designed to
provide management access to any Canoga Perkins fully manageable 2U
module. An EIA 232 port provides terminal or modem access and an
RJ45 connector provides 10BaseT access to the installed module.
Network operators can gain management information via Telnet,
SLIP/PPP, VT100 terminal access, or modem. Switches for connector
configuration, local and remote loopback and LEDs are located in the
front for easy access. The EdgeAccess 1020 is available with AC
power and comes with wall mount brackets
|
| |
Canoga Perkins UCS 1030E
The EdgeAccess 1030E is a cost
effective alternative to the UCS 1020 listed above for applications
that do not require local management access. It holds one fully
manageable or limited management 2U module. The 1030E is available
with AC power and comes with wall mount brackets.
|
| |
Canoga Perkins UCS 1040
The EdgeAccess® 1040 is
a one-slot enclosure designed to provide management access to any
Canoga Perkins fully manageable 5U module. An RJ45 connector
provides 10BaseT access to the installed module so network operators
can gain vital management information via Telnet, SNMP or
CanogaView®. Switches for connector configuration, local and remote
loopback and LEDs are located in the front for easy access. The
EdgeAccess® 1040 is available with AC power and comes with wallmount
brackets.
|
| |
Canoga Perkins UCS 1050
The EdgeAccess®
1050 is a cost effective alternative for applications that do not
require local management access. It holds one fully manageable or
limited management 5U module. The 1050 is available with AC power,
or non-powered for WDM modules, and comes with wallmount brackets.
|
| |
Rack Mount Kit / RackMount Kit
This kit provides the necessary hardware to
install two Canoga Perkins’ UCS Standalone devices in a rack.
|
| |
|
ETHERNET OVER FIBER |
| |
Canoga Perkins Model N525
Ethernet Termination Service Unit (ETSU). The N525 ETSU permits
Ethernet traffic to be used over
fiber optic cable to extend its distance and enhance its security.
|
| |
|
OUTSIDE PLANT (OSP) - TEST AND MEASUREMENT |
| |
Canoga Perkins Model 1401E Time Domain
Reflectometer (TDR)
The Canoga Perkins Model
1401e Time Domain Reflectometer (TDR) will locate and identify
faults and problems in telephone cables and DSL lines.
|
| |
Canoga Perkins Model P400 Cable Identification
Kit Cable
Identification Kits enable OSP craftsmen to record cable number and
pair count information on the tags for future changes or new
installations. Each kit includes 100 tags, ties and a marking pen.
|
| |
Canoga Perkins Model PR25A Conductor Tagger &
Analyzer The Model PR25A Conductor Tagger and Analyzer is a multifunction
test set that enables fast, accurate tagging of working and
non-working lines, while eliminating the risk of disturbance to the
customer.
|
| |
Canoga Perkins Model PR80A Tunable Amplifier
The Model PR80A Tunable
Amplifier is used to locate cable trouble and identify pairs.
Compatible with most popular tone generators, the PR80A enables
craftsmen to tune to the exact frequency of the tone sent,
facilitating tone identification
|
| |
|
VIDEO CONFERENCING |
| |
Canoga Perkins 3310 Video Conferencing Optical
Multiplexer The 3310 Mark II is a Video
Conferencing Optical Extender (VCOE). It is designed to extend the
distance between endpoints of video conferencing systems over fiber
optic cable in a variety of applications
|
| |
Canoga Perkins 3260 DS-3 Video Multiplexer
Designed for point-to-point video conferencing
applications. The 2240-MC features an extensive selection of
interface options, including data and dialer on one fiber pair
|
| |
|
DIGITAL VIDEO EXTENDERS
|
| |
Canoga Perkins 2240-MC
Designed for point-to-point video conferencing
applications. The 2240-MC features an extensive selection of
interface options, including data and dialer on one fiber pair
|
| |
Canoga Perkins 3320
Canoga Perkins 3320 Series of SDI
Digital Video Extenders provides high performance extension of SMPTE
SDI Digital Video on standard multimode and single mode optical
fiber.
|
|
|
